5-Series 3/4" Diameter
Tungsten Spark Gap

Drilling out heatsinks for 3/8-24 Tap

Tapped!

The heat sinks...6061 aluminum. Fins are parted with a parting
tool...

Other end has a 1/4-20 tapped hole

Here is how I tapped them...

Brian Foley sent me some awesome 3/8-24 silver plated copper set screws

Heating the tungsten disk...

Extremely hot still, brazed with very hard silver solder

Two sections of the gap...needs polishing, but testing it first...

Really crude, but I can't wait to test it!

This looks good...

So does this!

And this!
(C) Jeff Behary, 2010
|